BACKYARD GRAVEYARD III: THE DENIZENS

So the stones are spooky and everyone's impressed by the mausoleum, but... there's a graveyard down the street. Where's the scare? Any Halloween set can be improved by denizens. You can get pretty elaborate, but simple can be effective as well.
Our dragon was more impressive with a victim at his claws. A bag of skeleton bones from the local box store and a child's role playing Knight set with a shield, helmet and sword (with some spray paint "charred " effects) and it was done.
The Mummy was made by creating a basic skeleton out of rolled up catalogs that had been accumulating (how's that for recycling?). They were tied together with plastic shopping bags and then the entire thing was wrapped in gauze bought down at the pharmacy. If you find a cotton gauze, then it's possible to "distress" it with a tea bath. The smallish skull that we used happened to glow in the dark, so we elected to keep our mummy a stark white to show up best in the dim light.
The Pirate and the Ghoul were both constructed using the same method. Two pieces of 2x4 were screwed together in a simple cross shape with the horizontal board acting as the shoulders and the vertical board extending far enough to hold up the head. Next we straitened out two sections on coat hanger wire long enough to go the length of the arms with a little extra for the hands. Taking a pair of needle-nosed pliers we then twisted one end of each "arm" into as tight as circle as possible perpendicular to the rest of the wire. This is how we screwed the wire into either end of the 2x4. This way the arms are somewhat positionable. For the Ghoul we just draped a store-bought costume from the year before over the structure. Plastic bags filled out the head, arms and hands. The pirate was just made out of old costume parts and a skull mounted on a dowel.

The Witch in the rocking chair is similar to the Ghoul and Pirate, in that it is mostly a store-bought costume mounted on a 2x4 frame. In this case however there is a base on the seat and additional 2x4 legs extending downward. She has been a mainstay at our parties, creeping guests out enough so that they would avaoid her and enter through the backdoor. If you want to steer guests and trick-or-treaters towards your backyard display, an imposing figure like this blocking the front entrance can quite effective.

Pirated from the web

So it's been while. As I begin to prepare some of our own posts take a gander at this incredible pirate mask I found at chensational.blogspot.com.
It was created talented puppet builder Kanja Chen whose work I've been following since his Chewbacca puppet was featured in a magazine.
This mechanical mask uses a $30 hockey helmet as the base and a bike cable to control the mouth and eyebrows. It's somewhat complicated and uses some pretty specific materials, but the finished product is really impressive. Check out his tutorial at the link above. There's also a youtube video to show it working.
I'll be adding some more stuff soon, but in the meantime enjoy the pirate. It definitely is Chensational.

WHAT'S A PIRATE WITHOUT A PARROT?

So you're going to a pirate themed party and you just don't feel like being one of the 30 some odd Jack Sparrows in the room. When faced with a similar problem I decided to become the favorite accessory of every pirate and piratess. ess. After all, how can you be a real pirate without a parrot on your shoulder? And Jimmy Buffet fans take note: this would probably make a swell parrothead get up for you too.

My skills at the time were pretty basic, so the materials are too:

• a green baseball cap
• 2 styrofoam balls (1 1/2" - 2" dia)
• 1 bag of green feathers
• 1 bag of assorted feathers
• yellow crafter's foam
• green red and yellow felt

As you can see, the construction is pretty basic too. I cut the upper half of the beak out of the yellow craft foam with a split down the middle on the front so I could create the curve. I wrapped the foam sides underneath the hat brim and stapled and hot glued it in place. I then cut a piece of red felt to go behind the eyes to make him a little less monochromatic.

The styrofoam balls were wired in place and I carefully drew the eyeballs in with a sharpie pen. I actually used construction paper circles to figure out the best placement for the pupils; I learned from a Jim Henson interview that if you make them ever so slightly crossed then it looks like they are focused on something and that can be the key to making your creation come alive.

After that it was a matter of layering and gluing the feathers in place. I added longer yellow feathers on the sides as pseudo eyebrows.

The body was just a series of simple tubes made in felt and stuffed with feathers glued to the wings. The lower beak was made similarly to the upper and then attached to the hat with elastic while the body hung around my neck like a necktie.

A black turtleneck and a see-through hood and I was ready to sit atop friends' shoulders for the perfect piratey photo opportunity.